Policy Routing in Multi-Arm Deployment
Very new to F5, coming from a Netscaler background.
I'm deploying F5 into an environment where I have an interface in the DMZ, an interface in a private DMZ and a third interface in the trusted network. I also have the mgmt interface connected to another network. Currently, I have IP addresses assigned to each of these interfaces but the only route I have is the default route on the mgmt interface. I'm wanting to configure routing such that the return traffic from any virtual server on the DMZ routes out via the DMZ gateway and any virtual server on the trusted network will route out via the trust gateway. I've looked at an article on configuring policy based routing via iRules and assigning the iRule to each virtual server accordingly - https://support.f5.com/csp/article/K20510467
I'm just wondering if this is the only/best way to do this or if there's a more suitable option to do what I want to do.
Have a look at this , Auto Last Hop (this is the same as Netscalers MAC-based forwarding (MBF)
https://support.f5.com/csp/article/K13876