Forum Discussion
NimbostratusF5 virtual edition license issue.
Getting mulitple error as "Bandwidth utilization is 1083 Mbps, exceeded 75% of Licensed 10000 Mbps" after that we upgrade the F5 VE license to 3Gbps even after license upgrade getting same error.
Bandwidth utilization is 1083 Mbps, exceeded 75% of Licensed 1000 Mbps
Bandwidth utilization is 854 Mbps, exceeded 75% of Licensed 1000 Mbps
Bandwidth utilization is 989 Mbps, exceeded 75% of Licensed 1000 Mbps
Bandwidth utilization is 946 Mbps, exceeded 75% of Licensed 1000 Mbps
If you have any suggestions on it would be appreciated.
After you re-activated license on the unit, with the license code that was provided, have you tried rebooting? Issue a full_box_reboot command.
11 Replies
- whisperer
MVP
Looks like you didn't actually apply the reg code, re-activate license, and restart services. Error logs show you still have 1GB license in play.
MilitzaAs i can check from cli license is upgraded but still getting same bandwidth exceeded logs.
# show /sys license detail | grep perf_VE_throughput_Mbps
perf_VE_throughput_Mbps [3000]Gui also showing 3 Gbps.
I pushed that license from BIGIQ.
Hi Militza ,
Could you please have a look in the below Articles from F5 :> https://my.f5.com/manage/s/article/K99532652
> https://my.f5.com/manage/s/article/K51405603Also have a look on this Solution on DevCentral :
https://community.f5.com/t5/technical-forum/ve-ltm-frequently-reporting-bandwidth-exceeding-75-of-licensed/td-p/306629
Thanks- whisperer
After you re-activated license on the unit, with the license code that was provided, have you tried rebooting? Issue a full_box_reboot command.
Hello,
Can you check on whether the license is upgraded or not?
To display the maximum allowed throughput rate, type the following command:
#show /sys license detail | grep perf_VE_throughput_Mbps
Referenece: https://wtit.com/f5-resources/big-ip-ve-system-enforces-licensed-throughput-rate/
Also, you can check by asking F5 using the below link, and F5 will provide you with detailed information related to your new key.
https://secure.f5.com/validate/validate.jsp
- you can select: "Product information request"
- Then, enter email and key.
- You will receive an email contains all information related to the new key.
Thanks,
- Militza
Its worked after rebooting.
