Forum Discussion
NimbostratusCLI Configuration utility -ERROR: route_mgmt_entry count is 5
From F5 LTM Cli config Comes up with a Configuration utility dialog box . After clicking OK get this error: ERROR: route_mgmt_entry count is 5
This happens on all our LTM's running 10.2.4 and version 11 Obviously we can work around this using commands but I am wondering why this happens.
1 Reply
arpydayslooks like this is expected behaviour and the config utility doesn't like it when you have an existing non-default mgt route already configured and you then use config. IF you removed the non-default mgmt route I expect you could then use the utility.
cheers
ID 419733
BIG-IP systems configured with additional non-default management routes via static, OSPF or other protocols might post error messages. The problem occurs when multiple management interfaces are defined. The system might post route_mgmt_entry count errors during the operation of the /usr/bin/config script. Workaround: You can use an alternative method exist to configure the mgmt address and default route: GUI, iControl, tmsh, and configuration file load.
