Unable to Access vip
I am unable to access the vip(192.168.0.240:80) from my windows 7 pc, I enabled the snat option too, appreciate any guidence
Thanks
***********************************************************************
Setup
Windows 7 PC
|
Virtual Box
|
|
|VM1::Linux :: App1 running in port :80
|
VM2::Bigip
Config 1
[root@bigip1:Active] config b virtual
VIRTUAL ADDRESS 192.168.0.240 UNIT 1
| ARP enable
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
+-> VIRTUAL my_weblogic_mike_virtual_server SERVICE http
| PVA acceleration none
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
| requests (total) = 0
+-> POOL my_weblogic_mike_pool LB METHOD member least conn MIN/CUR ACTIVE MEMBERS 0/2
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
+-> POOL MEMBER my_weblogic_mike_pool/192.168.0.143:http active,up
| | session enabled priority 1 ratio 1
| | (cur, max, limit, tot) = (0, 0, 0, 0)
| | (pkts,bits) in = (0, 0), out = (0, 0)
| | requests (total) = 0
+-> POOL MEMBER my_weblogic_mike_pool/192.168.0.143:webcache active,up
| session enabled priority 0 ratio 1
| (cur, max, limit, tot) = (0, 0, 0, 0)
| (pkts,bits) in = (0, 0), out = (0, 0)
| requests (total) = 0
Config 2
virtual my_weblogic_mike_virtual_server {
snat automap
pool my_weblogic_mike_pool
destination 192.168.0.240:http
ip protocol tcp
persist my_weblogic_mike_persist_profile
profiles {
bea_weblogic_http-wan-optimized-compression_shared_http {}
my_weblogic_mike_lan-optimized_tcp_profile {
serverside
}
my_weblogic_mike_one_connect_profile {}
my_weblogic_mike_wan-optimized_tcp_profile {
clientside
}
}
}
Config 3
[root@bigip1:Active] config b self
SELF 10.10.10.100 mask 255.255.255.0
| VLAN external floating disable
SELF 11.11.11.100 mask 255.255.255.0
| VLAN internal floating disable
[root@bigip1:Active] config b self list
self 10.10.10.100 {
netmask 255.255.255.0
vlan external
allow default
}
self 11.11.11.100 {
netmask 255.255.255.0
vlan internal
allow default
}