Description of HTTP caching profile statistics
Hi F5'ers, within bpsh: profile http my-optimized-caching ramcache entry all show Host: 10.80.0.1 URI: / | 1 hits Size: 364 Rank: 1 Source: 0/0 Owner: 0/3 | Received: 2012-03-13 03:55:57 Last sent: 2012-03-13 04:02:41 | Expires: 2012-03-14 14:14:22 Vary: accept encoding Vary count: 1 | Vary user agent: none Vary encoding: none what do "Vary", "Vary count", "Vary user agent" and "Vary encoding" show? R's, Alex
How many times to reboot for install software?
Hi How many times to reboot for install software images? From this information ------------------------------------------------------- Sys::Software Status Volume Product Version Build Active Status -------------------------------------------------------- HD1.1 BIG-IP 10.2.1 511.0 yes complete HD1.2 BIG-IP 10.2.1 511.0 no complete HD1.3 none none none no complete I want to upgrade into 10.2.4 HF5 on HD1.2 volume (or must both volume??) First I install 10.2.4 Final into HD1.2 and reboot into HD1.2 , and then reboot again into HD1.1 to install 10.2.4 HF5 into HD1.2 and reboot into HD1.2 to use 10.2.4 , Am I correct? (Reboot 3 times) Do you have better solutions ? like install 10.2.4 and install HF5 respectively and then reboot only once times. (Reboot 1 times) Another questions is what impact if I backup ucs from 11.2.1 HF1 and restore in 11.2.1 HF2 ? thank you
b interface show: unpopulated vs down ?
Hi there. I couldn't find this in the Big-IP System and Network Management nor the Ask F5. Hoping someone here can help me When I type in a "b interface show" I get the below: [root@secondary:Standby] config b interface show interface speed pkts pkts pkts pkts bits bits errors trunk Mb/s in out drop coll in out mgmt DN 100 FD 0 0 0 0 0 0 0 1.1 UP 1000 FD 454.9M 490.7M 13650 0 596.0G 469.3G 0 1.2 UP 1000 FD 256.5M 249.9M 2.384M 0 293.2G 158.2G 0 1.3 UP 100 FD 32.19M 4.161M 2.894M 0 26.84G 25.79G 0 1.4 DN 1000 FD 0 0 0 0 0 0 0 2.1 MS 1000 FD 0 0 0 0 0 0 0 2.2 MS 1000 FD 0 0 0 0 0 0 0 What is the "DN" vs the "MS" ? When I look on the gui, it says 1.4 is "DOWN" and 2.1 and 2.2 are "UNPOPULATED"? The longer version is that we are adding another VLAN to our network and my manager asked me if we had any free interfaces to do so. Physically there are no cables plugged in to 1.4, 2.1, and 2.2. I'm guessing we can use 1.4. I was just curious what those statuses meant. Can someone explain what that column means? Thanks, Ben
WebException in GetResponse
Please excuse and redirect me if I'm posting in the wrong area but I'm hoping someone here at F5 can be some help. I have a web application which uses a class library I created which, among other things, reads an XML file on the web host (an IIS 6 server/cluster). When I run the app locally in VS2010 or on my testing platform, also an IIS 6 server, it works fine. When I publish to my BIG-IP load-balanced 2 server Veritas Cluster, the code executes fine as long as I use each nodes' name but if I use the cluster's friendly name I get the following exception: The underlying connection was closed: An unexpected error occurred on a receive. at System.Net.HttpWebRequest.GetResponse() at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) at System.Xml.XmlTextReaderImpl.OpenUrlDelegate(Object xmlResolver) at System.Threading.CompressedStack.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.CompressedStack.Run(CompressedStack compressedStack, ContextCallback callback, Object state) at System.Xml.XmlTextReaderImpl.OpenUrl() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at System.Xml.XmlDocument.Load(String filename) at Symantec.DataFactories.AdomdClientDataFactory.GetStoredProcedure() There is more to the stack but that's the gyst of it. I had previously gone at the file more directly with HttpWebRequest.GetResponse() and switched to using XmlDocument.Load() in the hopes that I'd been doing something wrong. No joy. The server is running DotNET 3.5 so the abundance of articles directing me to a fix for 1.0 aren't useful. I did attempt to fix it by setting the HttpWebRequest's KeepAlive to false. Again, no joy. I'm guessing that either we have something mis-configured on the servers or I need to modify my code to better deal with the load balancing. Here's the code I'm trying to run: // Request and read the file. try { // Read and cache the file XmlDocument xmlFile = new XmlDocument(); xmlFile.Load(AbsoluteUrlUsingAuthority); string fileContents = xmlFile.InnerXml; HttpContext.Current.Cache.Insert(cacheKey, fileContents, null, Cache.NoAbsoluteExpiration, new TimeSpan(0, CacheSlidingExpirationMinutes, 0)); } catch { // Fall back to using WebResponse methodology for debugging try { // Ask the web server for the file HttpWebRequest request = (HttpWebRequest)WebRequest.Create(AbsoluteUrlUsingAuthority); request.KeepAlive = false; using (WebResponse response = request.GetResponse()) using (TextReader reader = new StreamReader( response.GetResponseStream(), Encoding.GetEncoding("utf-8"))) { // Read the contents of the file. string file = reader.ReadToEnd(); // Close the stream. reader.Close(); // Add the file to the cache, sliding expiration. HttpContext.Current.Cache.Insert(cacheKey, file, null, Cache.NoAbsoluteExpiration, new TimeSpan(0, CacheSlidingExpirationMinutes, 0)); } } catch (WebException webException) { if (webException.Status == WebExceptionStatus.NameResolutionFailure) throw new Exception("Bad domain name", webException); if (webException.Status == WebExceptionStatus.ProtocolError) { HttpWebResponse response = (HttpWebResponse)webException.Response; if (response.StatusCode == HttpStatusCode.NotFound) { throw new Exception( string.Format("Requested file, {0}.xml, not found. {1}", _command.CommandText, response), webException); } if (response.StatusCode == HttpStatusCode.Forbidden) { throw new Exception( string.Format("403 (Access denied) error accessing {0}. {1}", AbsoluteUrlUsingAuthority, response), webException); } if (response.StatusCode == HttpStatusCode.Unauthorized) { throw new Exception( string.Format("401 (Authentication required) error accessing {0}. {1}", AbsoluteUrlUsingAuthority, response), webException); } } throw; } } I've been pulling my hair out on this for weeks now so any guidance on debugging and/or troubleshooting from a coder's perspective, considering I have to work through a (human) proxy to take any actions on the server would be appreciated.Playing a flv video through Firepass
Hello ! In our company, our internal website often shows videos, interviews. I can't make it work when I access the website through Firepass. Here's the code I'm using : <script type="text/javascript"> script><br><br><div id="myplayer">div> It gets translated by Firepass to : <script type="text/javascript"> script><script>try{F5_flush(document);}catch(e){}script><br><br><div id="myplayer">div> The flvplayer is loaded but the video won't show. I don't know why the addVariable remains and is not translated to a F5_Invoke_addVariable ( I don't know if that exists) Any help ? TIA !pool member monitor versus pool monitor
Hi F5'ers, (in configuring a pool using CLI/tmsh) which monitor is used to determine state of a pool if member-specified monitor is different to pool-specified monitor? Are both used or member's monitor is used? Stretching this, what if none of the member-specified monitors are the same, what should pool-specified monitor be? R's, Alex