Pasadena_CIS_12
May 19, 2011Nimbostratus
b interface show: unpopulated vs down ?
Hi there.
I couldn't find this in the Big-IP System and Network Management nor the Ask F5. Hoping someone here can help me
When I type in a "b interface show" I get the below:
[root@secondary:Standby] config b interface show
interface speed pkts pkts pkts pkts bits bits errors trunk
Mb/s in out drop coll in out
mgmt DN 100 FD 0 0 0 0 0 0 0
1.1 UP 1000 FD 454.9M 490.7M 13650 0 596.0G 469.3G 0
1.2 UP 1000 FD 256.5M 249.9M 2.384M 0 293.2G 158.2G 0
1.3 UP 100 FD 32.19M 4.161M 2.894M 0 26.84G 25.79G 0
1.4 DN 1000 FD 0 0 0 0 0 0 0
2.1 MS 1000 FD 0 0 0 0 0 0 0
2.2 MS 1000 FD 0 0 0 0 0 0 0
What is the "DN" vs the "MS" ? When I look on the gui, it says 1.4 is "DOWN" and 2.1 and 2.2 are "UNPOPULATED"? The longer version is that we are adding another VLAN to our network and my manager
asked me if we had any free interfaces to do so. Physically there are no cables
plugged in to 1.4, 2.1, and 2.2. I'm guessing we can use 1.4. I was just curious
what those statuses meant.
Can someone explain what that column means?
Thanks,
Ben