For more information regarding the security incident at F5, the actions we are taking to address it, and our ongoing efforts to protect our customers, click here.

Forum Discussion

Petr_Kocian's avatar
Petr_Kocian
Icon for Nimbostratus rankNimbostratus
Feb 12, 2016

SNMP traps sent only in v2c, not in v3

Hi

 

I have this setup: BIG-IP v12.0.0, 1x SNMP Traps destination for version 2c, 1x SNMP Traps destination for version 3. My BIG-IP does not send traps in version 3. Version 2c traps are sent only.

 

I captured packets by tcpdump and there are only packets for version 2c.

 

I did not make any modification of /etc/alertd/alert.conf nor /config/user_alert.conf

 

Have you please any advice what's wrong?

 

BIG-IP
devops
monitoring and management
snmpv3
TMOS

2 Replies

  • eneR's avatar
    eneR
    Icon for Cirrostratus rankCirrostratus
    Feb 15, 2016

    Do you also have other devices where snmp v3 is running fine?

     

    Have you checked the trap destination settings for any mistake?

     

    Correct security level and auth protocol configured?

     

  • Petr_Kocian's avatar
    Petr_Kocian
    Icon for Nimbostratus rankNimbostratus
    Feb 15, 2016

    I have another 2 devices where snmpv3 is runing fine. On theese devices there are 1 snmp v2 destination and 2 snmpv3 destination. I checked configuration several times for any mistake. Configuration is the same (detination, auth, privacy, protocol, and port also.)