Forum Discussion

Jahmed_335337's avatar
Jahmed_335337
Icon for Nimbostratus rankNimbostratus
Oct 03, 2017

Reset command failure

I entered the reset command as below but it gives out with "syntax error". what i went wrong ???

 

tmsh modify /sys db tm.rstcause.pkt value enable tmsh modify /sys db tm.rstcause.log value enable tmsh modify /sys db log.ssl.level value Debug

 

Syntax Error: unexpected argument "tmsh"

 

application delivery
LTM
on command line
TMOS
  • cjunior's avatar
    cjunior
    Icon for Nacreous rankNacreous
    Oct 03, 2017

    Hi, Try to put that three commands in separated lines or separated by semicolon eg.

    Run on advanced shell (bash):

    tmsh modify /sys db tm.rstcause.pkt value enable
tmsh modify /sys db tm.rstcause.log value enable
tmsh modify /sys db log.ssl.level value Debug

    or

    tmsh modify /sys db tm.rstcause.pkt value enable; tmsh modify /sys db tm.rstcause.log value enable; tmsh modify /sys db log.ssl.level value Debug

    or

    tmsh -c "modify /sys db tm.rstcause.pkt value enable; modify /sys db tm.rstcause.log value enable; modify /sys db log.ssl.level value Debug"

    Run on tmsh:

    modify /sys db tm.rstcause.pkt value enable
modify /sys db tm.rstcause.log value enable
modify /sys db log.ssl.level value Debug

    or

    modify /sys db tm.rstcause.pkt value enable; modify /sys db tm.rstcause.log value enable; modify /sys db log.ssl.level value Debug

    I hope it helps.

    Regards.