Basic IP COnfiguration

Our networking team sets up the port channel on the switch side and configures it for the VLAN that we want (i.e. say VLAN 10) so we don't need to do tagging on the F5 side. We basically pick two F5 interfaces and create a F5 trunk called internal_trunk. Then we create an F5 VLAN called internal and assign the internal_trunk to it. Then we we create a Virtual Server, we have the ability to "enable on" and select the F5 VLAN called "internal". By setting it up that way, we can determine that the traffic will come in and out on the interfaces we designated to be used with our Virtual Server.