cancel
Showing results for 
Search instead for 
Did you mean: 
Login & Join the DevCentral Connects Group to watch the Recorded LiveStream (May 12) on Basic iControl Security - show notes included.

Viprion: Modify VLAN tags in bigip_base.conf

Zuke
Cirrostratus
Cirrostratus

Hello friends. I unfortunately have no lab viprions to test this. I have two VLAN tag mismatches on one of my hosts, and that VLAN is on all 5 guests that reside on the host. I need to rectify this mismatch in order to deploy BIG-IQ, otherwise I get error conditions and offline guests.

 

My friend gave me this process:

 

  • Take a backup of the bigip_base.conf
  • Edit the bigip_base.conf
  • tmsh load sys config verify
  • tmsh load sys config
  • Check the results, commit the change with tmsh save sys config

 

My question is, in doing this on the host, what will then happen with the bigip_base.conf on the guests? Does "load sys config" on the host make the guests update their bigip_base.conf file as well?

1 REPLY 1

Samir
Nacreous
Nacreous

Its not recommend solution in prod environment. you will face outage if guest will be in Active on VCMP host device.