NimbostratusHello Mahnsc.
Sure, you can. Try it with this:
https://support.f5.com/csp/article/K53142338
If this helps, please mark the answer as 'the best' to help other people to find it.
Regards,
Dario.
Hello Mahnsc.
You can stop the service during those maintenance works.
## Stop services
tmsh stop sys service snmpd
tmsh stop sys service alertd
## Check services status
tmsh show sys service snmpd
tmsh show sys service alertd
## Start services
tmsh stop sys service snmpd
tmsh stop sys service alertdRegards,
Dario.
BTW, in section SNMP > Traps > Configuration > Agent Start / Stop
You can disable SNMP Traps exclusively.
REF - https://techdocs.f5.com/kb/en-us/products/big-ip-afm/manuals/product/dns-dos-firewall-implementations-12-1-0/7.html
Regards,
Dario.
NimbostratusThanks! I apologize for not responding sooner. I was hoping to see if there was a solution that could be applied more granularly to specific nodes and/or pools but it doesn't appear so.
Hello Mahnsc.
Sure, you can. Try it with this:
https://support.f5.com/csp/article/K53142338
If this helps, please mark the answer as 'the best' to help other people to find it.
Regards,
Dario.
NimbostratusDoesnt this article only show how to disable traps for only virtual servers? what about a specific pool, node etc? is it the same syntax? what about the snmp oid then? Would be great if anyone can reply quick since i need to disable alerts for specific virtual servers, pool as well as nodes.
Thank You
NimbostratusThanks a lot!