high voltage on GBIC

[neeeewbie]

Hi guys

I need your help !

I know how to show ddm value (voltage, dbm), etc)

log automatic displaying when gbic received high voltage ?

or need manual checking ??

Please let me know if you know that ~

thanks

[Dario_Garrido]

Hello Neeeewbie.

Knowing how to extract that value, you can configure a custom MIB to report that state.

https://support.f5.com/csp/article/K13596

Also, you can configure a periodic iCall to monitor that value and log a message when the issue occurs.

Regards,

Dario.

[neeeewbie]

Hi

thank you but we don't know what value is show dangerous ,, do you know the dangerous value ?

[Dario_Garrido · Accepted solution]

Hello Neeeewbie.

You can use DDM to check your power thresholds.

Transmit and Receive Power Thresholds Transmit Low Alarm Threshold 0.1000mW -10.00dBm Transmit High Alarm Threshold 3.1623mW 5.00dBm Transmit Low Warning Threshold 0.1585mW -8.00dBm Transmit High Warning Threshold 1.9953mW 3.00dBm Receive Low Alarm Threshold 0.0398mW -14.00dBm Receive High Alarm Threshold 2.1878mW 3.40dBm Receive Low Warning Threshold 0.0794mW -11.00dBm Receive High Warning Threshold 1.7378mW 2.40dBm

REF - https://support.f5.com/csp/article/K83253027

Regards,

Dario.