Forum Discussion
neeeewbie
MVP
MVPhigh voltage on GBIC
Hi guys I need your help ! I know how to show ddm value (voltage, dbm), etc) log automatic displaying when gbic received high voltage ? or need manual checking ?? Please let ...
Hello Neeeewbie.
You can use DDM to check your power thresholds.
Transmit and Receive Power Thresholds Transmit Low Alarm Threshold 0.1000mW -10.00dBm Transmit High Alarm Threshold 3.1623mW 5.00dBm Transmit Low Warning Threshold 0.1585mW -8.00dBm Transmit High Warning Threshold 1.9953mW 3.00dBm Receive Low Alarm Threshold 0.0398mW -14.00dBm Receive High Alarm Threshold 2.1878mW 3.40dBm Receive Low Warning Threshold 0.0794mW -11.00dBm Receive High Warning Threshold 1.7378mW 2.40dBmREF - https://support.f5.com/csp/article/K83253027
Regards,
Dario.
Dario_Garrido
Noctilucent
NoctilucentHello Neeeewbie.
Knowing how to extract that value, you can configure a custom MIB to report that state.
https://support.f5.com/csp/article/K13596
Also, you can configure a periodic iCall to monitor that value and log a message when the issue occurs.
Regards,
Dario.
- neeeewbie
Hi
thank you but we don't know what value is show dangerous ,, do you know the dangerous value ?
- Dario_Garrido
Hello Neeeewbie.
You can use DDM to check your power thresholds.
Transmit and Receive Power Thresholds Transmit Low Alarm Threshold 0.1000mW -10.00dBm Transmit High Alarm Threshold 3.1623mW 5.00dBm Transmit Low Warning Threshold 0.1585mW -8.00dBm Transmit High Warning Threshold 1.9953mW 3.00dBm Receive Low Alarm Threshold 0.0398mW -14.00dBm Receive High Alarm Threshold 2.1878mW 3.40dBm Receive Low Warning Threshold 0.0794mW -11.00dBm Receive High Warning Threshold 1.7378mW 2.40dBmREF - https://support.f5.com/csp/article/K83253027
Regards,
Dario.
