Forum Discussion
Simon_Blakely
Oct 25, 2017Employee
The VLAN setting of a virtual defines the vlans that listen for incoming packets that establish a connection. Reply packets hit a vlan and are matched to an existing connection, defining the path through the LTM.
Please note, due to VLAN keying (which is a default setting), returning packets will only be matched to the connection table if they hit the egress VLAN. You can disable VLAN keying (with caveats).
Or will I just enable the inbound VS on VLAN 20 and only enable the outbound VS on VLAN 10?
This is correct.