Forum Discussion
genseek_32178
Nimbostratus
NimbostratusVS Issue
Hi,
Have the following 2 Virtual servers config,
virtual VS1
pool pl443
destination 1.1.1.1:443
ip protocol tcp
profiles tcp-default
vlan 2 enable
...
genseek_32178Nimbostratus
NimbostratusHamish,
SNAT is enabled and is defined as part of the iRule, rules standard_rule.
The URL mapped to the VIP cannot be accessed if the source is in the same range as the VIP,203.23.35.x...which is VLAN 10.
Do we need to enabled VLAN 10 on the Virtual?
