Forum Discussion

genseek_32178's avatar
genseek_32178
Icon for Nimbostratus rankNimbostratus
Jun 27, 2012

VS Issue

Hi,     Have the following 2 Virtual servers config,     virtual VS1   pool pl443   destination 1.1.1.1:443   ip protocol tcp   profiles tcp-default   vlan 2 enable   ...
basic
getting started
new to f5
Hamish's avatar
Hamish
Icon for Cirrocumulus rankCirrocumulus
Jun 28, 2012
Posted By El_Jefe on 06/28/2012 06:52 AM

 

genseek - enabling only on the one VLAN means it will only route traffic on that VLAN.

 

To expand a little. To make a VS active on only 1 VLAN means that the packets TO that IP address need to come into he TMM via the named vlans. Any others will be dropped.

 

 

Also be aware that asymetric routing is not supported... If the bigip opens a tcp connection OUT one interface it will expect the responding packets to come IN tha interface roo.