Forum Discussion
genseek_32178
Nimbostratus
NimbostratusVS Issue
Hi,
Have the following 2 Virtual servers config,
virtual VS1
pool pl443
destination 1.1.1.1:443
ip protocol tcp
profiles tcp-default
vlan 2 enable
...
genseek_32178Nimbostratus
NimbostratusThanks for the reply nitass and El_Jefe
can you plz tell me the exact command for tcpdump...to check the handshake ..directly on the F5 and not using wireshark etc..etc
El_Jefe,
VIP is enabled on the VIP vlan 2
So does it mean, VIP will listen only if traffic is originating fom VLan 2 and not from ANY other VLAN creatd on the F5?