Forum Discussion

genseek_32178's avatar
genseek_32178
Icon for Nimbostratus rankNimbostratus
Jun 27, 2012

VS Issue

Hi,     Have the following 2 Virtual servers config,     virtual VS1   pool pl443   destination 1.1.1.1:443   ip protocol tcp   profiles tcp-default   vlan 2 enable   ...
basic
getting started
new to f5
El_Jefe's avatar
El_Jefe
Icon for Nimbostratus rankNimbostratus
Jun 27, 2012
Clear your browser cache. I have seen weird issues like this be just that. If the VIP is truly responding on 443 via telnet, (i.e., you're getting real traffic back from the pool member, and not just echos....), then the LTM is really working and doing it's job. Also, I notices it just enabled on one vlan, try enabling it on all, and see if that makes a difference, and check to see if SNAT Automap is turned on or not.