VIP issue

Just simply applying the above command it will overwrite the xfwrd profile and replace it with clientssl?actually, it will replace all existing profiles with the one in the command line (clientssl and tcp).

also, say, if i were asked to remove only xfrwrd profile and retain rest of the Virtual as it is, what single command with bigpipe i need to use to remove the xfrwrd profile from the VIP w/ touching any other part of VS. e.g.

[root@ve10:Active] config  b virtual vl100-bz list
virtual vl100-bz {
   snatpool bz-vl100
   pool bz-pl
   destination 172.20.10.50:443
   ip protocol 6
   persist persist-profile
   profiles {
      http-xforward {}
      tcp {}
   }
   vlans vlan100 enable
}

[root@ve10:Active] config  b virtual vl100-bz profile http-xforward delete

[root@ve10:Active] config  b virtual vl100-bz list
virtual vl100-bz {
   snatpool bz-vl100
   pool bz-pl
   destination 172.20.10.50:443
   ip protocol 6
   persist persist-profile
   vlans vlan100 enable
}

ps. tcp profile is not shown after deleting http-xforward profile because it is default one.

by the way, if you are not familiar with bigpipe command, i suggest trying tmsh. it would be easier since there is feature such as context sensitive help, tab-completion.

v.10 Introduction to the tmsh Command Shell by Don Mac Vittie

https://devcentral.f5.com/tech-tips/articles/v10-introduction-to-the-tmsh-command-shell