upgrading SW-utilities (v10->v11)

Hi We are geting the following error:

 

 

============================

 

 

3.ucs no-license no-platform-check tmsh load /sys ucs au01ulb022qanb2-17-04-201

 

Processing UCS file: /var/local/ucs/test-17-04-2013.ucs

 

 

Installing full UCS (10.2.4) data, excluding license file.

 

Saving active configuration...

 

The hostname is set to test.x.x.x.x

 

Extracting manifest: /var/local/ucs/test-17-04-2013.ucs

 

Product : BIG-IP

 

Platform: C113

 

Version : UCS : 10.2.4

 

System: 11.3.0

 

Edition : UCS : Hotfix HF3

 

System: Final

 

Hostname: au01ulb022qanb2.eqp.qantas.com.au

 

Installing --full-- configuration on host test.x.x.x

 

Installing configuration...

 

ATTENTION REQUIRED:

 

Your previous configuration files have been archived, as listed

 

below. If you customized any settings in these files before

 

upgrading, you will need to manually restore those changes by

 

using the Configuration utility or Traffic Management Shell (tmsh).

 

Archiving /config/wa/globalfragment.xml.10.2.4

 

Archiving /config/wa/pvsystem.dtd.10.2.4

 

Archiving /config/wa/pvsystem.conf.10.2.4

 

Archiving /config/wa/transforms/common.zip.10.2.4

 

Post-processing...

 

Reloading License and configuration - this may take a few minutes...

 

Configuration loading error: high-config-load-failed

 

For additional details, please see messages in /var/log/ltm

 

 

WARNING: There were one or more errors detected during installation.

 

Check the error messages and take the proper actions if needed.

 

ERROR: UCS installation failed.

 

Operation aborted.

 

[root@test:Active] ucs

 

 

=================================

 

If I try the following then it seem working.

 

 

[root@test:Active] ucs /usr/libexec/bigpipe daol

 

Reading configuration from /config/bigpipe/low_profile_base.conf.

 

Reading configuration from /config/bigpipe/config_base.conf.

 

Reading configuration from /config/bigpipe/bigip_sys.conf.

 

Reading configuration from /config/bigpipe/bigip_base.conf.

 

Reading configuration from /config/bigpipe/base_monitors.conf.

 

Reading configuration from /config/bigpipe/profile_base.conf.

 

Reading configuration from /config/bigpipe/daemon.conf.

 

Reading configuration from /config/bigpipe/bigip.conf.

 

Reading configuration from /config/bigpipe/bigip_local.conf.

 

Loading the configuration ...

 

[root@test:Active] ucs

 

 

=============

 

Quetion : what could related to Configuration loading error: high-config-load-failed ? It seem like WebAccelerator class and policy not load properly. Is there any command to fix it ?

 

 

Thanks