Forum Discussion
NimbostratusTrying to load an UCS from an hardware bigip 11.6.2 to a VE 13.1.1 with platform migrate option but it failed with the LACP
Hi Everyone,
I'm struggling with an UCS with LACP configuration and I can't import it in a VE. Here the CLI I used:
tmsh load sys ucs F5_backup.ucs no-license platform-migrate
2019 Feb 22 16:54:15 F5-ISO load_config_files: "/usr/bin/tmsh -n -g load sys config partitions all platform-migrate" - failed. -- Loading schema version: 11.6.2 Loading schema version: 13.1.1 01070687:3: Link Aggregation Control Protocol (LACP) is not supported on this platform. Unexpected Error: Loading configuration process failed. Configuration loading error: high-config-load-failed
Do you any idea how skip the LACP part ?
Thanks a lot
Mo
RaghavendraSYAltostratus
For this type of error, I suggest you to go with SCF file instead of UCS file.You can edit SCF file with required configurations.
Refer below article:
https://support.f5.com/csp/article/K13408 (11.x to 14.x)
Samir_Jha_52506Noctilucent
NUT2889Cirrostratus
Hi,
Normally for VE platform doesn't support LACP (Trunk) configure. Please try to remove the LACP (Trunk) configure.
JesseG_357836I ran into this issue when converting physical to vCMP. What I did is unpack the UCS file, modifed bigip.conf to remove lacp references and repackaged the UCS file.
This will tell you how to extract and repackage UCS file https://support.f5.com/csp/article/K12278
- Adriano_Bezerr1
Cirrus
I faced the same problem, to solve quickly and practically, I edited the file bigip_base.conf, removing the LACP relation that existed, after that I loaded the file normally with the command tmsh load sys config