Forum Discussion
yunan_haris
Altocumulus
Altocumulusreplacing blade 2100 to 2150 viprion c2400
greetings all, i am newbie on installing viprion series, my customer has viprion C2400 with existing blade 2100 which is end of life device, right now they have already purchase 2150 to replace the ...
Hi~ I'm not sure of the answer but did find a couple other Support articles that might help:
Manual : VIPRION Systems: Blade Migration
and from that Article, there is:
Example 5: Replacing a single blade
That is correct. I would tell you that you probably want to have a maintenance window ready and a proactive case with F5 support. Just in case. It's a major event. Start with the backup VIPRION. Once it's back up.. and it will take time to boot.. you fail to it. Then do the other. Fail back if you want to, but no hurry. 🙂
yunan_harisAltocumulus
Altocumulushi AubreyKingF5
thank you for explanation, so the slot 1 still have the configuration on it although we used command chassisvdisk migrate, isnt it? if we want to rollback to slot 1, we just pull the slot 2 and insert the slot 1 back again, right?
AubreyKingF5
Moderator
ModeratorThat is correct. I would tell you that you probably want to have a maintenance window ready and a proactive case with F5 support. Just in case. It's a major event. Start with the backup VIPRION. Once it's back up.. and it will take time to boot.. you fail to it. Then do the other. Fail back if you want to, but no hurry. 🙂
- yunan_haris
hi AubreyKingF5 , thank you, will try to do that