list pools a node is in via tmsh

Hi all,

I found this post while attempting to do something very similar, and thought I'd share what I came up with. It's my first time posting code on devcentral, so hopefully it comes through with the formatting in tact. FYI I'm running this directly on the LTM, version 11.2.1

Caveats:

Here's an example output (names/IPs changed from my work environment):

./map.sh 192.168.0.10
Searching for 192.168.0.10 in LTM config ...
  pool_web_servers (session monitor-enabled, state up)
    --> vs_website01 (192.168.1.80 on port 80/tcp)
    --> vs_website01-https (192.168.1.80 on port 443/tcp)

  pool_ssh_servers (session monitor-enabled, state up)
    --> vs_login_pool (192.168.1.22 on port 22/tcp)

Anyway, of course standard disclaimer applies (ymmv, "no warranty or guarantee of fit for any purpose is expressed or implied", don't run this in production without testing it in your environment first!! yadda yadda yadda ... ) - hope this is helpful to someone out there!

!/bin/bash

 Eventually, some nicer input handling would be great
: ${1:?"The first argument of this script is the IP address to find.  Example: ./map.sh 192.168.1.1"}
IP=$1

 Just in case you want to modify the invocation of tmsh
TMSH='tmsh -q';

echo "Searching for $IP in LTM config ... ";

 This outputs Node->Pool->VS ... opposite of the GUI
for POOL in `$TMSH list /ltm pool one-line | grep $1: | awk '{print $3}'`; do
         Get session and state info from the pool listing
        session=`$TMSH list /ltm pool $POOL members | grep -A30 "address $1" | grep -m 1 -B30 "}" | grep "session " | awk '{print $2}'`
        state=`$TMSH list /ltm pool $POOL members | grep -A30 "address $1" | grep -m 1 -B30 "}" | grep "state " | awk '{print $2}'`

         Spit out info on the pool membership
        echo "  $POOL (session $session, state $state)";

         Now go trolling through all the VSs for any one that has this pool as its default pool
        for VIRTUAL in `$TMSH list /ltm virtual one-line | grep $POOL | awk '{print $3}'`; do
                 Get the IP address and service port
                destination=`$TMSH list ltm virtual $VIRTUAL | grep destination | awk '{print $2}'`

                 F5 uses names of ports from /etc/services instead of numbers ...
                  I personally find this super annoying. 

                 Figure out if it's tcp or udp (or sctp)
                protocol=`$TMSH list ltm virtual $VIRTUAL | grep ip-protocol | awk '{print $2}'`
                 Split out the IP ...
                vs_ip=`echo $destination | cut -f1 -d':'`
                 ... and the name of the service port
                vs_svc_name=`echo $destination | cut -f2 -d':'`
                 Now find it in /etc/services
                vs_svc_port=`grep $protocol /etc/services | awk '$1 == "'$vs_svc_name'" {print $2}'`

                 Finally, spit out the information about the VS
                echo "    --> $VIRTUAL ($vs_ip on port $vs_svc_port)";
        done;
        echo;
done

(tmos)list ltm pool | grep -b 20 x.x.x.x | grep ltm pool

Is there any way to find out a member in GTM pools?

Found this thread looking for the same data. I'd like to clean up unused nodes, as we move out of a data center. None of these submitted solutions return any data for me.

Hi, you could try to generate a QKVIEW and upload it to https://ihealth.f5.com, so, you'll get check diagnostics including unused objects.

Regards.

tmsh list ltm pool one-line | grep xxx.xxx.xxx.xxx | awk '{print $3}' > test.txt

I make some modification on the basis, and output the vs-pool-pool_member, like this

[root@lab-1:Active:Standalone] config # sh network-map-output.sh 10.128.1.245

Searching for 10.128.1.245 in LTM config ...

dns_listener (10.128.10.230 on port 53/udp)

  Pool: bind_server_pool

     ---> 10.128.20.11 on port 53

     ---> 10.128.20.12 on port 53

     ---> 10.128.20.13 on port 53

p80_virtual1 (10.128.10.20 on port 80/tcp)

  Pool: p80_pool_11-12

     ---> 10.128.20.11 on port 53

     ---> 10.128.20.12 on port 53

p80_virtual2 (10.128.10.30 on port 80/tcp)

  Pool: p80_pool_13-14

     ---> 10.128.20.13 on port 53

     ---> 10.128.20.14 on port 80

vs_https_need_to_del (10.242.136.15 on port 443/tcp)

  Pool: p80_pool_11-12

     ---> 10.128.20.11 on port 53

     ---> 10.128.20.12 on port 53

vs_policy (10.128.10.201 on port any/tcp)

  Pool: iRules_pool11

     ---> 10.128.20.11 on port 53

vs_temp_need_to_del (10.242.136.1 on port 4488/tcp)

  Pool: bind_server_pool

     ---> 10.128.20.11 on port 53

     ---> 10.128.20.12 on port 53

     ---> 10.128.20.13 on port 53

============================================================================================

tmsh_mod="tmsh -q"

echo "Searching for $1 in LTM config ... "

vs_list=$( $tmsh_mod list ltm virtual one-line | grep " pool" | awk '{print $3}')

for vs in $vs_list

do

  vs_protocol=$($tmsh_mod list ltm virtual $vs | awk '$1=="ip-protocol" {print $2}')

  vs_ip_port=$($tmsh_mod list ltm virtual $vs | awk '$1=="destination" {print $2}')  

  vs_ip=$(echo $vs_ip_port | awk -F: '{print $1}' )

  vs_port_name=$(echo $vs_ip_port | awk -F: '{print $2}' )

vs_pool_name=$($tmsh_mod list ltm virtual $vs | awk '$1=="pool" {print $2}')  

  if [ "$(grep $vs_protocol /etc/services | awk '$1=="'$vs_port_name'" {print $2}')" ]  

  then

    vs_port=$(grep $vs_protocol /etc/services | awk '$1=="'$vs_port_name'" {print $2}')  

  else

    vs_port=$(echo "$vs_port_name/$vs_protocol")

  fi  

  echo "$vs ($vs_ip on port $vs_port)"

pool_member_addr_list=$($tmsh_mod list ltm pool $vs_pool_name | awk '$1=="address" {print $2}' )

echo "  Pool: $vs_pool_name"

for pool_member_addr in $pool_member_addr_list

do

pool_member_port_name=$($tmsh_mod list ltm pool $pools_pool | grep $pool_member_addr | grep addr -B1 | awk -F: 'NR==1 {print $2}' | awk ' {print $1}' )

the_name_map_to_port_requirement=$(grep $vs_protocol /etc/services | awk '$1=="'$pool_member_port_name'" {print $2}')

    if [ "$the_name_map_to_port_requirement" ]

then

pool_member_port=$(echo $the_name_map_to_port_requirement | awk -F/ '{print $1}')

  else

pool_member_port=$(echo $pool_member_port_name)

fi

echo "     ---> $pool_member_addr on port $pool_member_port"

done

done

Taking out the loop, will filter the specify the vs.

Taking out the loop, will filter the specify the vs.