Link Controller : outbound traffic go to ISP 2 until ISP 1 is reached the bandwidth limit

Hi Martin,

 

Yes, you can do it by adding weights to your links.

 

Browse to the LC -> Links and click on ISP1.

 

Under config change it to advanced.

 

Select the weighting parameter set to Price(Dynamic Ratio)

 

In the incremental segments add Up to : 10000000 bps @ 60 $/Mbps

 

and check the box for Duplex billing.

 

 

next clickon LC-> Links -> ISP2

 

Under config change it to advanced.

 

Select the weighting parameter set to Price(Dynamic Ratio)

 

In the incremental segments add Upto : 5000000bpd @ 120$/Mbps.

 

and check the box for Duplex billing.

 

 

Now in the LC > Inbound WideIps -> Select the wideip and select the members tab.

 

 

Select LB method as Quality of Service and under quality of service.. Mark all options to 0 except for Link Capacity.

 

 

Change the link capacity to say 1000 and click update..

 

 

you should be good

 

 

Hope this helps.. !!

 

 

 

Santosh.