Forum Discussion

unavailable's avatar
unavailable
Icon for Cirrostratus rankCirrostratus
Feb 27, 2025

Unable to ping from some self ip on Velos

Hello team,

I have configured a tenant on my Velos, everything works fine but, recently I have verified that

when I try to ping to my default gw with the  interface asociate to a self ip yellow-fe ping is ok but,

wher i try to do it by using another interface associate to a different self ip such as Mam_Fe ping does not works as expected.

I have attached the evidence.
I have reconfigured the vlan on my blade with no success; i've veified everything on my F5 but it seems that the configuration is ok.

Somebody could  help me for fixing this problem ?

 

Many thanks in advance for your time .

Awaiting your news.

LTM F5

1 Reply

  • Jmtaylor's avatar
    Jmtaylor
    Icon for Moderator rankModerator
    Dec 12, 2025

    unavailable​  Hello ,  just wondering if you  ever found the solution to this query.  I  was able to  find some information for you  if not 

     

    1. Remove and re-add the affected VLAN(s) to the tenant.
    2. Verify ARP table and routing table on the tenant.
    3. If the issue persists, set the tenant to provisioned, wait, then set back to deployed.
    4. If you are using ping -I <self-IP>, ensure your routing table is correct for the desired egress interface.
    5. If you are trying to ping management IPs between tenants on the same chassis, this is not supported.