Forum Discussion
IPHTTPS with DirectAccess Not working with F5
- Aug 19, 2013
True Mac spoofing is not needed.
I see two strange things. 1. Teredo interfaces are being enabled. Setup 2 interfaces behind edge device normally skips this step as Teredo only works with Public IPv4 addresses on the DA servers. 2. The pseudo network adapter is not getting an address assigned.
What is the output of the powershell command "get-NetDnsTransitionConfiguration" ?
Martijn
Thank you for the response! Here is the Output...I could not find out what is mentioned in your Post. Can you please check?
---------------------------------- IPv6 Configuration ----------------------------------
pushd interface ipv6 reset set global groupforwardedfragments=disabled add route prefix=fd37:3bf2:a48c:1::/64 interface="isatap.{74A133D5-B0FC-4D28-A5E9-D847384C2E58}" nexthop=:: publish=Yes add route prefix=fd80:aea0:34a6:1::/64 interface="isatap.{CF3F733D-4E37-4E79-A80D-12041AA27A41}" nexthop=:: publish=Yes add route prefix=fd80:aea0:34a6:1000::/64 interface="IPHTTPSInterface" nexthop=:: publish=Yes add route prefix=fd80:aea0:34a6::/48 interface="BE-PROD (DMZ-L3)" nexthop=:: publish=Yes add route prefix=fd80:aea0:34a6:7777::/96 interface="BE-PROD (DMZ-L3)" nexthop=:: publish=Yes set interface interface="Local Area Connection* 9" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled set interface interface="isatap.{74A133D5-B0FC-4D28-A5E9-D847384C2E58}" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled advertisedefaultroute=enabled set interface interface="Teredo Tunneling Pseudo-Interface" forwarding=enabled advertise=enabled mtu=1280 nud=enabled ignoredefaultroutes=disabled set interface interface="BE-PROD (DMZ-L3)" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled set interface interface="isatap.{CF3F733D-4E37-4E79-A80D-12041AA27A41}" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled advertisedefaultroute=enabled set interface interface="DMZ-L2" forwarding=disabled advertise=enabled nud=enabled ignoredefaultroutes=disabled set interface interface="Loopback Pseudo-Interface 1" forwarding=enabled advertise=disabled metric=0 siteprefixlength=0 nud=disabled routerdiscovery=disabled managedaddress=disabled otherstateful=disabled weakhostsend=disabled weakhostreceive=disabled ignoredefaultroutes=disabled advertisedrouterlifetime=0 advertisedefaultroute=disabled currenthoplimit=0 forcearpndwolpattern=disabled enabledirectedmacwolpattern=disabled ecncapability=ecndisabled set interface interface="6TO4 Adapter" forwarding=enabled advertise=disabled metric=0 siteprefixlength=0 nud=disabled routerdiscovery=disabled managedaddress=disabled otherstateful=disabled weakhostsend=disabled weakhostreceive=disabled ignoredefaultroutes=disabled advertisedrouterlifetime=0 advertisedefaultroute=disabled currenthoplimit=0 forcearpndwolpattern=disabled enabledirectedmacwolpattern=disabled ecncapability=ecndisabled set interface interface="IPHTTPSInterface" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled advertisedefaultroute=disabled add address interface="BE-PROD (DMZ-L3)" address=fd80:aea0:34a6:3333::1/128 add address interface="IPHTTPSInterface" address=fd80:aea0:34a6:1000::1/128 add address interface="IPHTTPSInterface" address=fd80:aea0:34a6:1000::2/128 popd
End of IPv6 configuration ---------------------------------- 6to4 Configuration ----------------------------------
pushd interface 6to4
reset set state state=enabled popd
End of 6to4 configuration
Help guide the future of your DevCentral Community!
What tools do you use to collaborate? (1min - anonymous)Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com