Forum Discussion
Sonny
Cirrus
CirrusConfiguring VS to access LTM
I have 2 management interfaces, x.x.10.1 and x.x.20.1. I normally access the device through 20.1. So I created a vs to access 10.1. However, looking at the tcpdump, I don't see any response back from...
SonnyCirrus
CirrusI'm running 11.6 HF5. Yes, I have all requirements you mentioned. I get the "This page can’t be displayed" error. Again, I'm not seeing any response back from management IP, .10.1
11:04:19.253489 IP (tos 0x0, ttl 255, id 63914, offset 0, flags [DF], proto: TCP (6), length: 48) x.x.20.3.62226 > x.x.10.1.https: S, cksum 0x2077 (correct), 610255474:610255474(0) win 4380 11:04:22.282875 IP (tos 0x0, ttl 255, id 63918, offset 0, flags [DF], proto: TCP (6), length: 48) x.x.20.3.62226 > x.x.10.1.https: S, cksum 0x2077 (correct), 610255474:610255474(0) win 4380 11:04:25.307598 IP (tos 0x0, ttl 255, id 63922, offset 0, flags [DF], proto: TCP (6), length: 48) x.x.20.3.62226 > x.x.10.1.https: S, cksum 0x2077 (correct), 610255474:610255474(0) win 4380