Forum Discussion
f5newuser_18231
Nimbostratus
NimbostratusConfiguring Active/Passive in One-Armed-Mode Setup
I've already configured my BIG-IP LTM in one armed mode setup and is working fine. Is there anyone who can provide step by step configuration?
f5newuser_18231Nimbostratus
NimbostratusSorry but I am pretty new in F5, so I need help on how to setup the passive and active mode. Do you have the topology on how to cable the two F5 network devices? Can you give also the step by step guide in GUI rather than CLI?
R_Marc_77962I don't use the gui, sorry. As far as cabling, that depends on your requirements. I, for example, connect the management interface to a management network, the console port to a terminal server, one or two interfaces to the DMZ (where actual traffic flows) and then connect the two nodes together with another interface. It really doesn't matter which interface for the DMZ and HA, in my case, but I utilize 10G ports where available. I set up my physical and VE instances in the same manner. The HA communication happens over both the cross connect and the management interface. If you have a sales engineer, I'm sure he/she can provide a custom diagram for your requirements and also a quick start guide for how to use the GUI. I find the CLI and Rest interface much more useful....but that's me.
