Forum Discussion
configuration utility restarting (upgrade)
Good day all,
In doing an upgrade on a virtual f5 and after loading the partition the gui is seen stuck at "configuration utility restarting".
I have tried restarting tomcat & http based on online information , but its not helping.
License is fine with no errors on it. Its been rebooted few times, any suggestions will be welcome.
Ok, i have figured it out myself. Hopefully it helps people in similar dire situation.
a) check current volume with list /sys software volum
b) remove unwanted volume with delete /sys software "volu name (HD1.1)"
c) do a load /sys config verify, should return clean with no errors
d) reboot
e) restart /sys service httpd
4 Replies
- suthomas1
Cirrostratus
Ok, i have figured it out myself. Hopefully it helps people in similar dire situation.
a) check current volume with list /sys software volum
b) remove unwanted volume with delete /sys software "volu name (HD1.1)"
c) do a load /sys config verify, should return clean with no errors
d) reboot
e) restart /sys service httpd
- suthomas1
Cirrostratus
thanks, it seems to be in run state.
i have rebooted and see the below errors.
Jul 15 00:26:58 f5-labinfo mprov:11127:: 'There are NO extra disks.'
Jul 15 00:26:58 f5-laberr mprov:11127:: 'Disk limit exceeded. 20088 MB are required to provision these modules, but only 7384 MB are available.'
Jul 15 00:26:58 f5-labinfo mprov:11127:: 'Provisioning (validation) failed.'
Jul 15 00:26:58 f5-laberr mcpd[9439]: 01071008:3: Provisioning failed with error 1 - 'Disk limit exceeded. 20088 MB are required to provision these modules, but only 7384 MB are available.' .
Jul 15 00:26:58 f5-labemerg load_config_files: "/usr/bin/tmsh -n -g load sys config partitions all" - failed. -- Loading schema version: 11.5.1 Loading schema version: 11.6.5.2 01071008:3: Provisioning failed with error 1 - 'Disk limit exceeded. 20088 MB are required to provision these modules, but only 7384 MB are available.' . Unexpected Error: Loading configuration process failed.
Jul 15 00:26:58 f5-laberr tmsh[11042]: 01420006:3: Loading configuration process failed.
Jul 15 00:26:58 f5-labemerg load_config_files: "/usr/bin/tmsh -n -g load sys config partitions all" - failed. -- Loading schema version: 11.5.1 Loading schema version: 11.6.5.2 01071008:3: Provisioning failed with error 1 - 'Disk limit exceeded. 20088 MB are required to provision these modules, but only 7384 MB are available.' . Unexpected Error: Loading configuration process failed.
Jul 15 00:26:59 f5-laberr mcpd[9439]: 01070425:3: Full configuration load failed.
Jul 15 00:26:59 f5-labinfo promptstatusd[6329]: 01460007:6: semaphore mcpd.running(1) released
Jul 15 00:26:59 f5-labnotice promptstatusd[6329]: 01460006:5: mcpd.running(1) released, subscribe to mcpd
A check on disk properties show me the following.
list /sys disk logical-disk HD1 all-properties
sys disk logical-disk HD1 {
mode mixed
size 81920
vg-free 3484
vg-in-use 78228
vg-reserved 0
The error says "Provisioning failed with error 1 - 'Disk limit exceeded. 20088 MB are required to provision these modules, but only 7384 MB are available.'" about disk space. But i am not confident on how to identify which disk or vg- is it referring to,i can't see any 7384MB in disk outputs.
Please assist.
,
Can you please check status of mcpd daemon if it is running ?
Mayur
- suthomas1
Cirrostratus
I did a few reboots again and it now shows inoperative in the command line.
license output looks fine with no "expired" seen.
Please help.
Help guide the future of your DevCentral Community!
What tools do you use to collaborate? (1min - anonymous)Recent Discussions
Related Content
* Getting Started on DevCentral
* Community Guidelines
* Community Terms of Use / EULA
* Community Ranking Explained
* Community Resources
* Contact the DevCentral Team
* Update MFA on account.f5.com