Forum Discussion
Emad
Nov 27, 2013Cirrostratus
For that Purpose You have to Create Two Vlans in LTM. For Example.
Create VLAN_1 on interface 1.1 Create VLAN_2 on interface 1.2
Assign Self IP from IP range 10.86.85.x or you can assign it as well. for VLAN_1 Assign Selp IP from Ip Range 192.168.0.1/32 for VLAN_2, Do not use 192.168.1.x as its being used for MGMT interface.
Assign IP address 192.168.0.15 to Interface 1.2, and create a pool with member 192.168.0.15.
Create VIP with IP 10.86.85.x and assign that pool member to it. Also validate if you need to add any route for the device. it would be better if you connect switch with interface 1.2 and then connect your laptop or any other machines with it.