Forum Discussion

mthornton42_217's avatar
mthornton42_217
Icon for Nimbostratus rankNimbostratus
Oct 01, 2015

Blade Migration Script Location

I'm guessing that the chassisConfigUpgrade.pm script will come on the new blades, I just want to confirm. If it doesn't, where is it available for download? I looked through the downloads section and...
application delivery
b2100
LTM
viprion
viprion c2400
  • Brad_Parker_139's avatar
    Brad_Parker_139
    Oct 02, 2015

    We just got done doing this. Yes, the script comes loaded on the blades. Just as a helping note, make sure you have all the image ISOs on your host and vCMP guests if using vCMP for the installed volumes you have. If not, it will just sit there waiting for the ISOs to be available.

     

Brad_Parker's avatar
Brad_Parker
Icon for Cirrus rankCirrus

We just got done doing this. Yes, the script comes loaded on the blades. Just as a helping note, make sure you have all the image ISOs on your host and vCMP guests if using vCMP for the installed volumes you have. If not, it will just sit there waiting for the ISOs to be available.

 

Brad_Parker's avatar
Brad_Parker
Icon for Cirrus rankCirrus
Oct 02, 2015
well since you are not running vCMP it shouldn't take you as long. Took us about 4 hours since we had 4 vCMP guests. I would say each blade it self would be about an hour being liberal. Probably less if you aren't doing anything other than just a straight swap. You going from 2100 to 2150 or 2250?