After adding VLAN's or SELF IP all goes red

Webserver address:
PV01 - 192.168.10.57
PV02 - 192.168.10.58

What ports?

Virtual IPs I would like to use
ACD-PV01-VS-http 192.168.10.149
ACD-PV01-VS-https 192.168.10.159

You dont need the second as they are on different ports so you can just have them on port 80 and 443 on the same IP address.

Management IP 192.168.110.147

Yes thats good.

• Self IP's? These attach your BIGIP to the network at layer 3
• VLAN's? These attached your BIGIP to the network at layer 2
• Interfaces? These are your physical links for layer 1

Procedure

1. Create VLAN using interface 1.1 (untagged if no VLAN)
2. Create Self IP on new VLAN 192.168.10.10 (if not in use)

3. Create pool pool_webserver with the following new members

   Name PV01 Address 192.168.10.57 Port ??
   Name PV02 Address 192.168.10.58 Port ??

4. Create Virtual Server vs_webserver_443

   Address 192.168.10.159 port 443
   HTTP Profile: http
   SSL Profile (Client) - clientssl
   if PV01/02 are HTTPS then SSL Profile (Server) - serverssl
   Source Address Translation - Automap
   Default Persistence Profile: Cookie
   Pool pool_webserver

5. Create Virtual Server vs_webserver_80

   Address 192.168.10.159 port 80
   HTTP Profile: http
   iRules _sys_https_redirect

That should get you up and running but like the man said, do some training. You need to have a better idea of how all this works 🙂