Forum Discussion
Mariappan_S_156
Nimbostratus
NimbostratusActive/Active or Active/Standby F5 HA
Hi all, Currently we have 2 F5 device and Plan to configure SSL VPN and Load balancer Exchange 2013. SSL VPN: Total SSL Users count 1500. We need to configure 2 URL – (ie:2 virtual sites). https://vpn1.xxx.in (122.14.xx.xx) https://vpn2.xxx.in (110.8.xx.xx)
We need your’s advice to configure the HA mode, Please Advise us which mode is advisable to configure Active/Active or Active/Standby
Mariappan S
You need to have a look at SOL13983 - BIG-IP APM support for Active Active high availability
The short answer is Active/Standby only configurations are supported for APM.
Kevin_Davies_40Nacreous
You need to have a look at SOL13983 - BIG-IP APM support for Active Active high availability
The short answer is Active/Standby only configurations are supported for APM.
Mariappan_S_156Thanks for your information. this info is useful for us.
- Kevin_Davies_40If any of the below posts have provided a solution to your issue, please indicate so by clicking the tick to the left of them. This gives feedback and recognition to the volunteers who responded to your issue