Forum Discussion
NAG
Cirrostratus
1) you said you have 2 viprion chassis. I assume you are using them to host active-standby setup for guests. If that's the true, all the guests are active on one Viprion host so you can carry out change on other Viprion chassis without disrupting prodution services.
2) once you swap the blades, configure management IP and activate license. And then upload Host UCS archive from previous setup and restore it.
Hope it helps,
Nag
NAG
Feb 27, 2020Cirrostratus
Looks like, there are no measures to minimise down time are built into the Architecture. Unless you use a new chassis with new blade, there is no way you can avoid downtime.