Forum Discussion
NAG
Cirrostratus
1) you said you have 2 viprion chassis. I assume you are using them to host active-standby setup for guests. If that's the true, all the guests are active on one Viprion host so you can carry out change on other Viprion chassis without disrupting prodution services.
2) once you swap the blades, configure management IP and activate license. And then upload Host UCS archive from previous setup and restore it.
Hope it helps,
Nag
Dexter
Feb 27, 2020Altostratus
That too sadly isn't the case either. Both Chassis, Hosts and Guests are seperate environment from each other. Looks like no way around other then to shut the production down :/