It stopped logging in /var/log/ltm but now when i running my load-test with 500k TCP connection with 800/s rate then some of my tcp connection not getting through and client saying failed to connect.
I have tried bunch of new TCP profile, buffer adjustment and all short of thing but no improvement but then i decided to add more SNAT ip in pool and that works i didn't get error of connection failure so i thought let me load more tcp connection so i start my load-testing with 600k tcp connection with 800/s rate and that test failed again with connection failure, so trying to understand why SNAT source port starving? I have check connection table and its not using all 64k ports but still something somewhere not right. Do you have any clue to trace this kind of issue? I may enable TCP reset cause logs and see..