Forum Discussion

Gojourichi's avatar
Gojourichi
Icon for Nimbostratus rankNimbostratus
May 16, 2021

SSLO routing error

Hi guys,

 

Whenever I try to run the SSLO with the services I always get the request back from my servers but if I add the services in the service chain it's not pushing thru. The devices are reachable with the corresponding interfaces, but I really can't seem to route and inspect the traffic from the services. Any ideas on how to fix this? Are there particular configurations that should be made first with my IPS to route the incoming traffic to the outgoing interface? I'm really lost on this one.

BIG-IP
ips
LTM
security
service chain
services
SSL Orchestrator

1 Reply

Sort By
  • Nikoolayy1's avatar
    Nikoolayy1
    Icon for MVP rankMVP
    May 17, 2021

    Have you done tcpdump to see if the F5 sends the data to the servers and if they return reply as you may have a ping but a specific port could be blocked (you may also use telnet command from the F5 device to check if particular port can be accessed on the IPS server):

     

    https://support.f5.com/csp/article/K411

     

     

    https://support.f5.com/csp/article/K13637

     

     

     

    Check the port lockdown on the self ip that connects to the IPS servers just in case:

     

    https://support.f5.com/csp/article/K17333

     

     

     

     

     

     

    Also check this article SSLO issue investigation:

     

     

    https://support.f5.com/csp/article/K13637