Forum Discussion
MN_van_der_Meer
Nimbostratus
NimbostratusReconfigure Application Service (iApp) via TMSH
I have created an application service with variables via the TMSH command: create /sys application service template variables add { variable1 { value "value1" } }
Now i need to reconfigure (modify?) this created application service. I found this command: modify /sys application service .app/ variables replace-all-with { variable1 { value "newvalue1" } }
When i check this application service in the GUI, i don't see the modified value. When i click the Reconfigure page in GUI then suddenly i see the modified value. I then need to click 'Finish' to apply this modification.
Is there a TMSH action to 'Finish' the modification?
Regards,
Martijn
This is the command line equivalent of the iApp "Finished" button:
modify sys application service my_app.app/my_app execute-action definition
What_Lies_Bene1Cirrostratus
should do the trick hopefully.[tmsh] save sys config
MN_van_der_MeerUnfortunately not.
What i see is that the application service variable itself is modified with the "modify /sys application service .."command, but the real monitor using that variable not.
"list /sys application service ...." gives the changed info: variables { variable1 { value newvalue } }
The save /sys config doesn't trigger the 'finished' action.- What_Lies_Bene1Hmmm. No ideas I'm afraid. iApps are a pain.
This is the command line equivalent of the iApp "Finished" button:
modify sys application service my_app.app/my_app execute-action definition
Mrk_I'm using the F5 module on Puppet, which (at this moment) doesn't send this parameter along. Made some changes locally, to see if this worked - and yes it does! So thanks for this ;).
- MN_van_der_Meer
Thanx Fred. That did the trick. :)
uniAltostratus
Or even do it all in one command:
modify /sys application service test.app/test variables modify { pool__addr { value 10.1.2.3 } } execute-action definition