Technical Forum
Ask questions. Discover Answers.
cancel
Showing results for 
Search instead for 
Did you mean: 
Custom Alert Banner

No more http Portal Access

fvi
Nimbostratus
Nimbostratus

Hi,

I can't find why all my Portal Access ressources with an application URI in http:// are not working.

Those with https:// in URI are OK

 

Thanks

1 ACCEPTED SOLUTION

Hmm, interesting one. Here are a couple of things you could try;

  • Have you got any ACL's in the traffic path that it may match? Seen that you get a firewall log for the HTTPS version, you may have one for the HTTP version as well, but without the logging?
  • Are you using the AD configuration for anything else than authentication? E.g. maybe using group memberships for assigning ACL's? When you changed something, this may accidentally have stopped working.
  • When you log in, check in the session variables list if you get all the information from AD that you would expect to see and that any objects get assigned that you expect to be assigned (such as ACL's)
  • From the F5 CLI, you can test the communication to the backend server (using "curl http://xxxx") to confirm that is still working (or not)

 

Hope this helps.

View solution in original post

4 REPLIES 4

AlexBCT
MVP
MVP

Hi,

 

Can you give some more details on the exact problem and when it happens? And is it something that you are seeing in the F5 GUI, or in your implementation? And what version of software are you working on? And is this an implementation that was working earlier and has stopped working, or has not yet worked?

fvi
Nimbostratus
Nimbostratus

The version is 16.0.1.1 hotfix 0.9.6

The implementation was working before but i have test AzureAD authentification and i may have change a parameter?

From the user point of view, i have a "This site is inaccessible" for http:// ressources

When i replace http:// by https:// i see a log in my firewall. With http:// i have no log in my firewall

It seams not going out of the F5

Hmm, interesting one. Here are a couple of things you could try;

  • Have you got any ACL's in the traffic path that it may match? Seen that you get a firewall log for the HTTPS version, you may have one for the HTTP version as well, but without the logging?
  • Are you using the AD configuration for anything else than authentication? E.g. maybe using group memberships for assigning ACL's? When you changed something, this may accidentally have stopped working.
  • When you log in, check in the session variables list if you get all the information from AD that you would expect to see and that any objects get assigned that you expect to be assigned (such as ACL's)
  • From the F5 CLI, you can test the communication to the backend server (using "curl http://xxxx") to confirm that is still working (or not)

 

Hope this helps.

fvi
Nimbostratus
Nimbostratus

Good idea, i test with curl and i was OK. Since i didn't find why, i have reset factory and recreate a test configuration. It is now OK. It will remain a mystery...

Thankes for you help.