Forum Discussion
Henry_Lau
Nimbostratus
NimbostratusLTM load balance for printing
We just configured F5 for printing load balance(standard VS, Not DSR). Loopback adoptors have been installed in 2 printer servers and run the netsh on interfaces. netsh interface ipv4 set interfac...
PeteWhite
Employee
EmployeeYou're going to have to provide more information than this - I suggest you start by looking at statistics to see whether the VS is being used and traffic sent to the backend server. If this doesn't show anything then you can run tcpdump to see the actual data being sent and you should be able to trace whether the issue is with LTM or not.
