Forum Discussion
Hi ,
I am having the same issue where my Virtual and Nodes are on two separate networks. When I enabled SNAT, my connection to the Virual server add worked but I also lost my original source Ip of the Client in return response to the Client end. It is showing the original request was made by the self-ip of the Node's VLAn to the actual Node.
You said "you have to configure The "receive connectors" default GW to F5", what did you mean? Can you give an example to solution?
My Client IP = 10.10.100.100
My External VLAN= selfip 1010.10.10
My Internal VLAN= selfip 1010.20.10
My Nodes are = 10.10.20.21 & 10.10.20.22 (but their default GW is IP 10.10.20.1 at the L3 Switch, since these nodes and not directlly connected to the F5). Both f5 and Nodes are VM hosts and are connected a L3 switch.