cancel
Showing results for 
Search instead for 
Did you mean: 

How to know OID about TMM usage ?

neeeewbie
MVP
MVP

Hi guys

I need help !!

 

our customer want to know tmm usage..

so, I found that

 

[root@vpn:Active:Standalone] config # snmpwalk -c public localhost .1.3.6.1.4.1.3375.2.1.7.5.2.1.19

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".1 = Gauge32: 14

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".2 = Gauge32: 1

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".3 = Gauge32: 12

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".4 = Gauge32: 2

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".5 = Gauge32: 12

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".6 = Gauge32: 3

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".7 = Gauge32: 12

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".8 = Gauge32: 16

[root@vpn:Active:Standalone] config # ^C

[root@vpn:Active:Standalone] config # snmptranslate -On F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."0".1

.1.3.6.1.4.1.3375.2.1.7.5.2.1.19.0.1

[root@vpn:Active:Standalone] config # snmpwalk -c public localhost .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.0.1

F5-BIGIP-SYSTEM-MIB::sysMultiHostCpuUsageRatio5s."".1 = No Such Instance currently exists at this OID

 

 

but I can't find separate OID how to know separate tmm usage OID ??

1 ACCEPTED SOLUTION

boneyard
MVP
MVP

try this at the end of the snmpwalk -On, it will show the numerical OIDs shown:

[user@bigip-01:Active:Standalone] config # snmpwalk -c public localhost .1.3.6.1.4.1.3375.2.1.7.5.2.1.19 -On .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.1 = Gauge32: 23 .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.2 = Gauge32: 27 .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.3 = Gauge32: 24 .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.4 = Gauge32: 25

 

View solution in original post

3 REPLIES 3

Please refer this article

https://support.f5.com/csp/article/K9524

snmpwalk -c public localhost .1.3.6.1.4.1.3375.2.1.8.2.3.1.32

 

I checked this article, but this article does not include seperate TMM cpu usage OID.

boneyard
MVP
MVP

try this at the end of the snmpwalk -On, it will show the numerical OIDs shown:

[user@bigip-01:Active:Standalone] config # snmpwalk -c public localhost .1.3.6.1.4.1.3375.2.1.7.5.2.1.19 -On .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.1 = Gauge32: 23 .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.2 = Gauge32: 27 .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.3 = Gauge32: 24 .1.3.6.1.4.1.3375.2.1.7.5.2.1.19.1.48.4 = Gauge32: 25