Forum Discussion
CirrusHow to configure my simple website using JAVA and apply F5 Big-IP LTM to each server??
The domain name must be configured at your DNS service provider.
Say your site should be www.my-awesome-site.com, then you need configure you DNS to point to the virtual IP you configured on the BIG-IP. Or in case there is a NAT device in front of the BIG-IP, you have to use the NATed IP.
If you need to redirect to some specific URL or Directory, you can do this with LTM Traffic Policies.
If you want your site to use SSL you have to configure a clientside SSL profile and you have to have a SSL cert + private key.
On the AskF5 youtube channel there are a couple of videos regarding SSL Certificates.
MVPThe domain name must be configured at your DNS service provider.
Say your site should be www.my-awesome-site.com, then you need configure you DNS to point to the virtual IP you configured on the BIG-IP. Or in case there is a NAT device in front of the BIG-IP, you have to use the NATed IP.
If you need to redirect to some specific URL or Directory, you can do this with LTM Traffic Policies.
If you want your site to use SSL you have to configure a clientside SSL profile and you have to have a SSL cert + private key.
On the AskF5 youtube channel there are a couple of videos regarding SSL Certificates.
CirrusHi Sir ,
Can you please help me with this if your familiar with the issue 😊. I actually planning to create an HA for both of my BIGIP servers.
Issue:
- Not all devices synced
- The time for my 1st and 2nd Big-Ip doesn't matched even though they have the same time-zone setup as Asia/Singapore.
Note: I don't know how to setup my NTP server, I just used the IP of my test server as NTP
Renato Alcala Jr.
