Hello, I have to create a irule or find any other way. Scenario, I am managing 2 Juniper SA 2500 (SSL VPN) devices in active/active clustering. Each client has their own sub-urls -- https://sslvpn.company.com/abc, https://sslvpn.company.com/xyz ...
I am fairly new to writing iRules and I am not even sure if this is possible. My company is trying to have me write an iRule that will redirect users who are using less then 128 bit encryption on SSL ciphers to redirect them to a information page. I ...
Hi, So far, it has been a hassle for me to configure MBLB. (see my first question: https://devcentral.f5.com/Community/GroupDetails/tabid/1082223/aft/2163630/asg/50/Default.aspx, That problem was essentially caused by error in network configurat...
Hi Folks, Searching for VLAN and Cisco hasn't yielded much so far, I'm just wondering if there are any documents that provide recommendations for integrating an F5 ASM with a highly available perimeter network using mostly Cisco gear. My main ques...
I have a list of uri's that I need to check against on incoming requests and send to an IP address or pool. I tried to put in the list with "or" statements but it wont load in v11.2. I am thinking the better way is to use iFules but all I can find ...
Hello all , A simple query , My list of user input parameter names in traffic learning shows "https://portaltest.hcbo.com/sso.dedmax" 1) Im trying to understand how can "https://portaltest.hcbo.com/sso.dedmax" be a parameter name? My developer...
I was un-able to enter an IPv6 network into my data class under address, via irule editor v 11.0.2. No matter the format I used it errored out with /48 is not a valid network address or CIDR format! I tried various formats for this network, 262...
Hello, I would like to disable some attack signatures on a specific server generated cookie on a LTM/ASM v10.2.4. This is pretty straightforward to do this for a parameter but it does not seem possible to configure ASM to do this for a specific coo...
Has anyone found a way to get at GTM info from LTM yet? I have a need to write an LTM iRule that does 'stuff' based on the status of poolmembers in a GTM pool... But LTM iRules can't access things like 'members 'green' to get the number of GTM pool...
Hi Everyone, I'm now diving into iControl & Powershell and I have come of doubts: What profile must have a user on TMOS to be able to execute commands using powershell & iControl? A user with a "manager" rol asigned to an specific partition cou...
I have an iRule using [HTTP::host] in a condition. I have one box where a lot of the time, it's coming in as blank, but against my dev box, and another set of boxes, it's fine. Is there a setting inside the F5 that could cause this? I'm stumped!
HI , I have requirement where my VIP has 4 pools each with context based and one default . DC -A pool 1 - when /sit matches choose pool 1 i.e (www.xyz.com/sit) pool2 - /dev pool3 -/uat pool4 - default when /sit is down it has to choose pools ...
Hi, Can you use the X-Forwarded-For option if the virtual server is a HTTPS server doing SSL offload? The virtual server is configured on port 443, with a client SSL cert. The pool members are also on port 443. I have enabled the X-Forwarded-...
My organization has a website that has some of its content local and some located at a cloud provider. I have an existing irule which forwards traffic to different pools based upon the URI's. I have a pool defined for our cloud provider containing...
I am trying to create a new pool using tmsh with already existing node members. I am using the following syntax: tmsh create ltm pool /demo-dashboard/ddsdemo-web_http_pool members add { /demo-dashboard/10.93.52.16:80 /demo-dashboard/10.93.52.64:80...
Hi All, I know there are tons of info on doman cookie modification . But basically needed to confirm this basic understanding :- 1) What are the different legitimate reasons that allow clients programs like webapp change server sent cookies? ...
Hi, I know here are some articles about this, but I still can't resolve my issue. Client is connecting to VIP and I need to change URI of his request. I tried redirect, but client was posting some data in original request and those data was lost ...
Hi everyone, Can anyone provide a link to a document from F5 which explains the difference between the TMOS V10 & V11. Regards,
Hi everyone, Can anyone provide a link to the document that explains the different types of reporting that the APM is capable of creating also showing some visual examples of the reports. Regards,
Hello,I am quite new in this PowerShell stuff. So sorry for any stupid ideas but really appriciate any tips and tricks from you. I tried to use this Powershell Snapin (F5 version 11.2) but when I checked the list of possible function I can't find a...
Hi all F5 experts , 1) We want to use F5 load balancer to comply with PCI standards.We have to use only Application security module feauture for some of the criticial server in DMZ segment. Need your valuable suggesion on below points a) Do we n...
Hi, I am wondering if it is possible to control cached documents in some conditional way. I have a scenario where there are several dependent documents. e.g. url1, url2, url3 with cache headers of 15 minutes at time 00:00 client browses url1 05...
Hi Guys , I have requirement bit confusing though of sharing with you to come with some ideas. My requirements is as i have 2 servers with 4 instances in DC and same in other DC for recovery. DC- A 1. host a: 8001 /sit host b: 8001 1. h...
I have a HA pair of LTMs that gets virtual servers dynamically configured at any time via API. When this happens, the VLANs and self IPs are not synced to the standby LTM (why it doesn't sync the VLANs is beyond me) So I need a way to script it......
Hi, I believe it's not possible as F5 should decrypt the HTTPS traffic in order to find out which HOST in the http header. So, if I have two sub-domains as following, and both of them are terminated on the same VIP. www.abc.com xxx.abc.com ...
is it possible to use an iRule in GTM to make a decision about which IP to hand back based on the contents of the URL? For example: client 1 is in Singapore and wants to access a resource http://someapp.com/resource1 he is given IP 25.11.4.4 ...
I am having some difficulty trying to configure a service for our internal clients using "One" IP address on a server but the server has multiple apps on different ports. Is it possible to create an Irule for the GTM to do the following: wip = tes...
We have posted a new version (2012_06_08) of the Exchange 2010 CAS iApp template; it replaces the previously available 2012_04_06 version. This version addresses various connectivity, login, and other configuration issues that have been reported to F...
Hi, We have multiple applications using the same host name but have a different context root. All these applications dont send in a cookie path. Because of this the JSESSIONID cookie is stepped over by each other in the browser when multiple appli...
Hello everyone I need to configure IPv6 I know we can configure it using Routing or radvd.conf but I do not know which configuration is better, we have a lot of web sites, Virtual servers and pools. I am new in this product BigIP version 10 and I ...
| User | Count |
|---|---|
| 22 | |
| 11 | |
| 10 | |
| 8 | |
| 5 |
