Forum Discussion
ltp_55848
Jun 30, 2011Nimbostratus
Hi Bhattman,
We are using Nexus, the following is an example of the applicable parts of the access list, policy and route map we are using (sanitised, made up addresses and names):
ip access-list TEST
10 permit tcp 10.4.0.0/16 eq www any
route-map TEST permit 10
match ip address TEST
set ip next-hop 10.4.0.10
interface VLAN_TEST
ip address 10.4.0.1/16
ip policy route-map TEST
I can see the reply packets from a request directly to the node in a tcpdump on the F5's so it seems as though my forwarding virtual server is not configured correctly.