Forum Discussion
Nimbostratusvirtual server configured with i rule stopped working after upgrade to 14.1 version
After upgrading the device from 11.6.3 to 14.1.2 all the virtual servers configured with i rule stopped processing traffic as expected. Just want to know is there any i rule syntax change when we are moving from older version to newer version?
Will appreciate your help
Thanks in advance
SWJOCirrostratus
Need current i-Rule syntax
Aayush_NarayanHi
Thanks for your reply.
But can you confirm that there is a syntax change in the upgraded version of ios.
It will be really helpful if you can provide some knowledge article link.
Thanks in advance
jaikumar_f5Noctilucent
I've seen a couple - like mutual authentication.
But it totally differs based on what logic you have used. Can you share a snippet of your Irule masking confidential parts.
Also are you saying every VS that's mapped with Irule is marked down ? When you remove it, its working ?
- Aayush_Narayan
Hi
Thanks for your reply
But the upgrade was done on device in production network and we reverted back immediately when it was not passing traffic. So I was not able to check after removing the irule . To check that we have to reproduce the issue which is not possible anytime soon.
Can you cite any case where the virtual server with i rule was not passing traffic after upgrade and the reason behind it?
Thanks in advance
- SWJO
Hi
As many guys mentioned, nobody know before check i-Rule.
The question is too broad before checking syntax.
at least you have to provide used syntax simply.
or Case-open to F5