F5 is upgrading its customer support chat feature on My.F5.com. Chat support will be unavailable from 6am-10am PST on 1/20/26. Refer to K000159584 for details.

Forum Discussion

LK_85527's avatar
LK_85527
Icon for Nimbostratus rankNimbostratus
May 20, 2015

Video Conference through LTM

Hi,we have BigIP-5000 ver 11.5.1 LTM box.Would like to explore the possibility of routing VC traffic through F5. VC is conducted LAN-->WAN and WAN-->Public(public).There are some 16 VC hardwares in t...
BinaryCanary_19's avatar
BinaryCanary_19
Historic F5 Account
May 20, 2015

No special configuration is required. Assuming you know enough about how the BigIP works to configure it to load-balance (or persist sessions) to your VC servers, then all you need is an appropriate virtual server with the appropriate profiles and the appropriate pool.

 

Unless of course you have a specific concern in mind, then you should lay it out so that a more specific response can be provided.

 

LK_85527's avatar
LK_85527
Icon for Nimbostratus rankNimbostratus
May 20, 2015
Fine I'll elaborate... The requirement is as follows... A third party from internet wants to dial branch office .The Br.Off has no Internet gateway.It’s internet g/w is HO which is in the WAN side. Now, this 3rd party should reach br.off VC (Polycom device) via HO. A VS will be created in F5 which is in HO LAN (DMZ).VS IP will be natted to a public IP thru a F/w which is again in HO. Behind the VS is a pool member (VC) of Br.Off.The idea is this 3rd party will dial the VS which in turn will send the traffic to the pool member. If the above is viable, then how to route the return traffic from Br.Off VC to the 3rd party. Any route is required in the routers of Br & HO?