Forum Discussion

pelle_71294's avatar
Icon for Nimbostratus rankNimbostratus
Mar 29, 2011

Upgrade from 10.1.0 to 10.2.1 - Snmp issues

Hi people,



I just upgraded our pair of 6400 from 10.1.0 to 10.2.1.


Upgrade wasn't an issue and it went fine, however afterwards I notice that most of the oids in F5-BIGIP-LOCAL-MIB is not working anymore.


While other things works as before.




Doing a full snmpwalk on one of the devices returns lots of data. But the F5-BIGIP-LOCAL-MIB returns nothing regarding vs statistics and our beloved 400/500 counter is gone also.




. (Virtual Server Name) - No oid.


and so on..




Anyone knows anything about this or is experiencing same issue? Can find any info on it.




5 Replies

  • I have 10.2.1 running (albeit with hotfix1 applied) and I am able to peruse that table just fine:

    [root@golgotha:Active] mibs  snmpwalk -v 2c -c public localhost F5-BIGIP-LOCAL-MIB::ltmVirtualServers.
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest1" = STRING: tmshtest1
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest2" = STRING: tmshtest2
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest3" = STRING: tmshtest3
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest4" = STRING: tmshtest4
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest5" = STRING: tmshtest5
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest6" = STRING: tmshtest6
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest7" = STRING: tmshtest7
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest8" = STRING: tmshtest8
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest9" = STRING: tmshtest9
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName."tmshtest10" = STRING: tmshtest10

  • Sorry for being unclear regarding upgrade, applied hotfix 1 as well.

    Most annoying. For some reason I don't get it working.

    snmpwalk -v2c -c public F5-BIGIP-LOCAL-MIB::ltmVirtualServers.
    F5-BIGIP-LOCAL-MIB::ltmVirtualServStatName = No Such Object available on this agent at this OID

    Will have to dig into this even more.
  • Are you walking it locally on the BIG-IP or remotely? If remote and and you don't have the F5 mibs installed this won't work, you'd need to use the actual oid string. Walk it from localhost on the BIG-IP and see if you get the same response. Otherwise I'd get a case open with support so they can assist your efforts.
  • Both internally and externally wasn't working.



    No clue why I didn't do this from the beginning. Just restarted snmpd now and guess what? It's working. No clue to why it wasn't working after upgrade. snmpd was running and I could get a lot of other snmp data from the devices. But both devices now works after restarting snmpd.



    Thanks for the pointers and help. Much appreciated.