Throughput per virtual server

Is this F5-BIGIP-LOCAL-MIB::ltmVirtualServStatClientBytesIn. is concurrent byteIn?

 

or accumulative ByteIn?

 

If it's accumulative ByteIn, I think we can't use it to see concurrent Throughput.

 

On version 12.1.x you have to include the partition too.

snmpget -v2c -c public 127.0.0.1 F5-BIGIP-LOCAL-MIB::ltmVirtualServStatClientBytesIn.\"/Common/VIP_name\"

There's templates for cacti that will pull the stats for Virtual Servers, pools, SSL Profiles, compression profiles etc. You can get them either from here (Search for cacti template) or from the cacti download site (I think the ones available on the cacti site are slightly different, and may not have all the graph templates the one here has).

 

 

If you have problems, drop me a line.

 

 

GH

 

I believe that the dashboard retrieves it's data through an internal API. It's not something I've looked into extensively though. I do not think it uses any method that is exposed externally.

Great, thanks!

 

 

Found some interesting numbers in table pool_member_stat.

 

 

Just out of curiosity... The throughput graph on the dashboard, how does that collect its data?

 

 

/Niklas

Niklas,

 

 

bigtop is good for general monitoring, but it's not good for highly detailed data. If you watch the timestamp in bigtop you'll notice that not every query is at exactly 2 sec. Using longer update intervals corrects for that, but then you're back to 10-second resolution. bigtop is great for getting an immediate idea of what the general traffic level is for your vips and for the system as a whole, but

 

 

You may want to take a look at the output from the tmctl command. It's more of an internal tool, and the format of the output and syntax both reflect that, but it would be easier to get the data you are after using tmctl than using parsing bigtop output. tmctl will also let you retrieve far more data than bigtop will.

 

 

 

--jesse

 

 

Thanks for the info!

 

 

We have lots of vips, so perhaps doing something like this would be better?

 

while [ 1==1 ]; do bigtop -bytes -nosort -n -vips 10 -nodes 0 -once |grep "10\.254\.254\.10"; sleep 2; done

 

I could pipe the output of bigtop to a file and do some parsing later.

 

 

Or is there any other way to capture traffic data?

 

 

/Niklas

I believe the F5 support team usually recommends querying not more frequently than every 10 seconds (see SOL6644 on support.f5.com). Also, the snmp service caches responses for a given table for 2 seconds, so you won't see any new information querying every second vs. every 2 seconds. If you just want live data (not for archival), try the "bigtop" command on the CLI (see "bigtop -h" for syntax).

 

 

As for the penalty, it really depends on how large your configuration is. When you query anything from one table, I believe the snmp agent internally fetches the data for that entire table (I'm not certain, you'd have to ask support). So if you have a large configuration (many virtual servers for example), your simple query might internally require fetching thousands of data points. You can monitor the impact by watching the CPU usage of snmpd and mcpd while you're doing queries every 2 seconds. Anecdotally, it's been my experience that if you have only tens of virtual servers you can usually get away with a lot of monitoring without any real impact.

Thanks!

 

 

A few of our applications changes traffic patters quite fast.

 

Is a big performance penalty to query the VirtualServStats say once a second?

 

 

 

/Niklas

Yes, possible with SNMP. The TMOS Management Guide (available on support.f5.com) has an overview of how to work with SNMP on BIG-IP devices. Specifically, you'll want to get data from the F5-BIGIP-LOCAL-MIB, in particular "ltmVirtualServStatClientBytesIn" and "ltmVirtualServStatClientBytesIn".

 

 

On a BIG-IP device that has SNMP enabled, allowing at least read-only access to a community named "public" you could try the following from the CLI (replace "vs01-http" with your virtual server name):

 

 

vip="vs01-http"

 

 

snmpget -v2c -c public 127.0.0.1 \

 

F5-BIGIP-LOCAL-MIB::ltmVirtualServStatClientBytesIn.\"$vip\" \

 

F5-BIGIP-LOCAL-MIB::ltmVirtualServStatClientBytesOut.\"$vip\"