SNMPv3 TRAP testing

Hello Folks,

 

I am trying to setup SNMPv3 on F5.

 

Running on BIG-IP version 12.1.2

 

Command Used for TRAP generation logger -p local0.notice "01070640:5: Node 1.2.3.4 TEST monitor status down."

 

Whenever i generate trap and take tcpdump, i get something as below :

 

tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on 0.0, link-type EN10MB (Ethernet), capture size 65535 bytes 20:06:02.741472 IP 20.30.40.50.43931 > 60.70.80.90.10.162: F=ap U=DD [!scoped PDU]

 

But not receiving any traps at the destination server.

 

Same setup when i use with SNMPv2, works fine without any issue.

 

Any recommendations ?